spheric-test2¶
English | Japanese
SPHERIC Test 2 -- 3D dam break against an obstacle (Kleefsman et al. 2005, MARIN experiment; J. Comput. Phys. 206:363). A water reservoir at one end of a closed tank is released and impacts a rectangular box on the floor. We record the two quantities the benchmark is judged on: pressure on the box's leading face (sensors P1..P4) and the free-surface height at probes H1..H4, as time series in sensors.csv, plus a VTK time series (phi) for ParaView.
Geometry¶

Animation¶
Fields¶
The fields this computation wrote at its last output step, plotted as they are. 3D cases show the mid-plane.


Build & run¶
Cost of the computation that made the figures on this page (Miyabi-G Grace CPU (72 cores, -stdpar=multicore)): 118.8 s wall.
Validation¶
| Tier | T2 — single-point comparison |
| QoI | P1-P4, H1-H4 |
| Reference | Kleefsman et al. (2005) / MARIN |
| Gate | — no gate |
Source & run details¶
| Item | Value |
|---|---|
| Target | orheo-spheric-test2 |
| Source | native/benchmarks/spheric_test2.cpp |
| Lattice | — |
| GPU twin | yes (orheo-spheric-test2-gpu) |
| Modules | two_phase.hpp |
| Gallery run | 2026-07-27 @ 8da31257 |
| Args | `` |
| Wall time | 118.85 s |
| CPU time | 8403.25 s |
| Device | Miyabi-G Grace CPU (72 cores, -stdpar=multicore) |
Computation log¶
The actual output of this computation (head and tail).
SPHERIC Test 2: grid 128x40x40 (dx=0.0250 m), dt=3.570e-04 s, ratio=10, glat=5.0e-05, nu=0.010, cs=0.00, MRT
box cells x[26,32] y[0,6] z[11,28]; front P x-cell=33
step 0/40000 t=0.000 s P1=0 Pa umax=0.00e+00 phimax=1.00
frame 0 (step 0/40000, t=0.000 s)
frame 1 (step 666/40000, t=0.238 s)
frame 2 (step 1332/40000, t=0.475 s)
frame 3 (step 1998/40000, t=0.713 s)
step 2000/40000 t=0.714 s P1=1324 Pa umax=3.00e-02 phimax=1.00
frame 4 (step 2664/40000, t=0.951 s)
frame 5 (step 3330/40000, t=1.189 s)
frame 6 (step 3996/40000, t=1.426 s)
step 4000/40000 t=1.428 s P1=2842 Pa umax=1.67e-02 phimax=1.00
frame 7 (step 4662/40000, t=1.664 s)
frame 8 (step 5328/40000, t=1.902 s)
...
frame 55 (step 36630/40000, t=13.075 s)
frame 56 (step 37296/40000, t=13.313 s)
frame 57 (step 37962/40000, t=13.551 s)
step 38000/40000 t=13.565 s P1=3114 Pa umax=2.40e-04 phimax=1.00
frame 58 (step 38628/40000, t=13.789 s)
frame 59 (step 39294/40000, t=14.026 s)
frame 60 (step 39960/40000, t=14.264 s)
step 40000/40000 t=14.278 s P1=3116 Pa umax=1.27e-03 phimax=1.00
wrote sensors.csv, solid.vti, spheric.pvd (61 frames). In ParaView open spheric.pvd (Threshold phi>0.5) + solid.vti (Threshold density>0.5 for the box).