Skip to content

External flow and wind engineering

English | Japanese

« Home

Separated flows around vehicles and buildings. Assessed by drag coefficients and wind-speed profiles.

11 cases.

ahmed-body
ahmed-body
Ahmed body external aerodynamics (ERCOFTAC case082; Ahmed et al. 1984) with the single-phase D3Q19 LBM (MRT +
airfoil2d
airfoil2d
NACA0012 at Re = 1000: the laminar polar -- showcase case B9 (docs/design/showcase-cases-design.md). ---------
forest-ahmed-body
forest-ahmed-body
Ahmed body external aerodynamics (ERCOFTAC case082; Ahmed et al. 1984) on the FOREST (block-AMR) solver, per d
forest-ahmed-d3q27
forest-ahmed-d3q27
Ahmed body external aerodynamics on the D3Q27 forest AMR-LBM with the CUMULANT collision -- Stage A of the D3Q
forest-ahmed-dynamic
forest-ahmed-dynamic
Dynamic (feature-following) AMR on the Ahmed body: the fine patch TRACKS the turbulent wake shed off the bluff
forest-aij-d3q27
forest-aij-d3q27
Ahmed body external aerodynamics on the D3Q27 forest AMR-LBM with the CUMULANT collision -- Stage A of the D3Q
forest-building
forest-building
AIJ CFD-guideline Case A -- isolated wall-mounted tall building in an atmospheric boundary layer (Meng & Hibi
forest-cube-canopy
forest-cube-canopy
Resolved cube-array urban canopy on the D3Q27-cumulant forest AMR-LBM -- Stage 4 of docs/design/forest-d3q27-d
forest-square
Square-section cylinder in cross-flow on the FOREST solver -- the LBM-required shedding case (docs/design/squa
drivaer
drivaer
The wake of the DrivAer fastback (a realistic car shape) on the D3Q27 cumulant AMR-LBM, fed with a section of a steady OpenFOAM solution; the y = 0 velocity field and the wake fluctuations are compared with the FVM.
wall-mounted-cube
wall-mounted-cube
Flow around a cube on a channel floor (ERCOFTAC case 41, Re_H = 40,000) with the D3Q27 cumulant LBM-LES: H/16 to H/48 grids against the LDA mean velocity and stresses, and the scaling of a 1.23e8-cell run up to 8 GH200.