forest-spheric-dyn-mixed¶
English | Japanese
SPHERIC Test 2 -- 3D dam break against an obstacle box (Kleefsman et al. 2005, MARIN experiment; J. Comput. Phys. 206:363) on the DYNAMIC interface-following mixed-resolution free-surface path -- the Stage-4 free-surface AMR stepper (freesurface_dynamic_mixed.hpp) applied to the violent SPHERIC run-up. The single-phase free-surface LBM (free_surface.hpp; Koerner/Thuerey VOF + MRT + Smagorinsky LES + free-slip tank walls) runs at COARSE (full tank) + FINE (a 2x bottom slab) simultaneously; the fine slab DYNAMICALLY FOLLOWS the interface (mixedfs_dynamic_regrid) and the coarse/fine seam is FLUX-MATCHED each coarse step (Berger-Colella reflux), so total fill-mass is conserved even when the collapsing reservoir / far-wall run-up pushes the seam into fluid.
Geometry¶

Fields¶
The fields this computation wrote at its last output step, plotted as they are. 3D cases show the mid-plane.

Plots¶
Time series and distributions of the QoI written by this computation. Where a reference value exists it is overlaid as a horizontal line.

Build & run¶
cmake -S native -B native/build && cmake --build native/build -j
./native/build/orheo-forest-spheric-dyn-mixed
Cost of the computation that made the figures on this page (Miyabi-G Grace CPU (72 cores, -stdpar=multicore)): 239.3 s wall.
Validation¶
| Tier | T2 — single-point comparison |
| QoI | P1-P4, H1-H4 |
| Reference | Kleefsman et al. (2005) / MARIN |
| Gate | — no gate |
Source & run details¶
| Item | Value |
|---|---|
| Target | orheo-forest-spheric-dyn-mixed |
| Source | native/benchmarks/forest_spheric_dynamic_mixed.cpp |
| Lattice | — |
| GPU twin | yes (orheo-forest-spheric-dyn-mixed-gpu) |
| Modules | free_surface.hpp, freesurface_dynamic_mixed.hpp, freesurface_mixed_step.hpp |
| Gallery run | 2026-07-27 @ d7395df2 |
| Args | 20 3500 1e-5 1e-3 0.16 1.0 15 2 40 2 1 . |
| Wall time | 239.32 s |
| CPU time | 5893.33 s |
| Device | Miyabi-G Grace CPU (72 cores, -stdpar=multicore) |
Computation log¶
The actual output of this computation (head and tail).
SPHERIC Test 2 DYNAMIC-MIXED (free-surface AMR): coarse 64x20x20 (dx=0.0500 m), fine slab 128x31x40 (dx=0.0250 m, +ghost), cby0=15 (0.750 m) DYNAMIC [min 4], dt_c=2.258e-04 s, glat=1.0e-05, nu=0.0010, cs=0.16, MRT, free-slip tank walls (no-slip box), drop_isolated=2, band=2 buffer=2 regrid/40, ratio_cf=0.5030 ratio_fc=1.9881
box coarse cells x[13,16] y[0,3] z[5,14]; reservoir coarse x[39,64) y[0,11); m0=4.036000e+04
[phase1] phase1_init.csv step 0 t=0.000 s front_x=2.013 m
step 0/3500 t=0.000 s front_x=2.013 m P1=0 Pa cby=15 (0.750 m) M=4.036000e+04 (dM/M0=0.00e+00) seamMis=0.00e+00 drift=0.00e+00
step 175/3500 t=0.040 s front_x=1.988 m P1=0 Pa cby=15 (0.750 m) M=4.035657e+04 (dM/M0=-8.51e-05) seamMis=9.40e-07 drift=9.40e-07
step 350/3500 t=0.079 s front_x=1.963 m P1=0 Pa cby=15 (0.750 m) M=4.034865e+04 (dM/M0=-2.81e-04) seamMis=3.94e-06 drift=3.94e-06
step 525/3500 t=0.119 s front_x=1.913 m P1=0 Pa cby=15 (0.750 m) M=4.034297e+04 (dM/M0=-4.22e-04) seamMis=7.52e-07 drift=7.52e-07
step 700/3500 t=0.158 s front_x=1.812 m P1=0 Pa cby=15 (0.750 m) M=4.036178e+04 (dM/M0=4.42e-05) seamMis=3.58e-06 drift=3.58e-06
step 875/3500 t=0.198 s front_x=1.738 m P1=0 Pa cby=15 (0.750 m) M=4.037342e+04 (dM/M0=3.32e-04) seamMis=4.63e-06 drift=4.63e-06
step 1050/3500 t=0.237 s front_x=1.638 m P1=0 Pa cby=15 (0.750 m) M=4.039021e+04 (dM/M0=7.48e-04) seamMis=5.76e-06 drift=5.76e-06
step 1225/3500 t=0.277 s front_x=1.513 m P1=0 Pa cby=15 (0.750 m) M=4.039014e+04 (dM/M0=7.47e-04) seamMis=2.77e-06 drift=2.77e-06
step 1400/3500 t=0.316 s front_x=1.413 m P1=0 Pa cby=15 (0.750 m) M=4.039912e+04 (dM/M0=9.69e-04) seamMis=1.02e-06 drift=1.02e-06
[phase2] phase2_break.csv step 1419 t=0.320 s front_x=1.388 m
step 1575/3500 t=0.356 s front_x=1.288 m P1=0 Pa cby=15 (0.750 m) M=4.040481e+04 (dM/M0=1.11e-03) seamMis=1.07e-06 drift=1.07e-06
...
step 2975/3500 t=0.672 s front_x=0.288 m P1=4234 Pa cby=15 (0.750 m) M=4.048119e+04 (dM/M0=3.00e-03) seamMis=3.10e-06 drift=3.10e-06
step 3150/3500 t=0.711 s front_x=0.163 m P1=3811 Pa cby=15 (0.750 m) M=4.048032e+04 (dM/M0=2.98e-03) seamMis=2.02e-06 drift=2.02e-06
step 3325/3500 t=0.751 s front_x=0.062 m P1=3621 Pa cby=15 (0.750 m) M=4.046533e+04 (dM/M0=2.61e-03) seamMis=7.70e-08 drift=7.70e-08
[phase4] phase4_wall.csv step 3359 t=0.758 s front_x=0.013 m
step 3500/3500 t=0.790 s front_x=0.013 m P1=3887 Pa cby=15 (0.750 m) M=4.047284e+04 (dM/M0=2.80e-03) seamMis=1.03e-06 drift=1.03e-06
wrote ./sensors.csv + phase{1,2,3,4}*.csv.
Conservation: MAX per-step drift-after-reflux = 3.818e-04 (rel), MAX per-regrid drift = 0.000e+00 (rel); FINAL total mass drift dM/M0 = 2.796e-03.
Phases reached: init=1 break=1 box=1 wall=1.